TATA PUNCH-SERVICE MANUAL

TRANSAXLE - TA65 Star 46 20. Put input shaft 5th gear on input shaft. NOTE: Ensure ground face (5th gear I/S) towards the bearing face. 21. Put conical washer and lock nut on input shaft. 22. Place 5th gear assembly (lay shaft) with bush and needle cage and synchro pack (5/R) along with shifter fork (5th gear) on shifter sleeve. Locate shaft hole on shifter fork to shifter shaft. 23. Lock the shifter fork on shifter shaft by spiral pin. 24. Place lock plate on lay shaft 5th gear assembly 25. Fix lock nut on lay shaft. 26. Lock the input shaft from below. Engage any one of the gears. 27. Tighten the lock nuts on both lay shaft and input shaft by giving torque of 12.3-16.7 mkg.