TATA PUNCH-SERVICE MANUAL

TRANSAXLE - TA65 Star 45 12. Ensure that all the spiral pins are pressed properly. 13. Apply liquid gasket (Anabond 90 or 3 bond 12S00) with proper bead size on front half / interface. 14. Assemble the housing (rear half) on lay shaft input shaft and shifter shaft and tap it gently and uniformly so that it gets located on lay shaft and input shaft bearing. 15. Fix Reverse Idler shaft mounting. 16. Fix the housing (rear half) and tighten the flanged mounting bolts to specified torque. 17. Tighten Filler Plug. 18. Place lock plates of lay shaft bearing and input shaft bearing and fix them by allen screws. Tap the shaft in either direction if required. 19. Place spacer on lay shaft.