SAFARI BSVI SERVICE MANUAL

Tire Pressure Monitoring System (TPMS) 7 mode and you can proceed for next steps.  Go to front left (FL) tire and start removing / increasing air from that tire by 1.2 psi/sec until hazard flashes and horn beeps once for short time. Stop removing the air and FL tire is learnt successfully.  Go to front right (FR) tire and start / increasing air from that tire by 1.2 psi/sec until hazard flashes and horn beeps once for short time. Stop removing the air and FR tire is learnt successfully.  Go to rear right (RR) tire and start removing / increasing air from that tire by 1.2 psi/sec until hazard flashes and horn beeps once for short time. Stop removing the air and RR tire is learnt successfully.  Go to rear left (RL) tire and start removing / increasing air from that tire by 1.2 psi/sec until hazard flashes and horn beeps once for short time. Stop removing the air and RL tire is learnt successfully.  Go to spare tire (SP) and start removing / increasing air from that tire by 1.2 psi/sec until hazard flashes and horn beeps twice. Stop removing air and Spare tire is learnt successfully.  TPMS learning is completed successfully.  To exit from learning mode, turn the ignition OFF. Fill all the tires to the OEM recommended pressure values. WARNING It is always necessary to follow the above sequence only for air removal from tires while learning. Failing to do so can wrongly learn the TPMS and the indications will be misleading. During learning, TPMS tell-tale and TPMS HMI display on your vehicle Instrument cluster will also show the learning status apart from hazard flashing and horn beeps. If TPMS has successfully entered into learning mode, TPMS tell-tale and tire alert symbol will glow continuously. The tire for which learning is being done will blink continuously and the tire for which learning is successfully completed will glow continuously.