SAFARI BSVI SERVICE MANUAL

ELECTRICAL 187 1. Sensor 1. Master Sensor Parking sensor side connector – Mating View Wiring harness side connector – Wire Entry View Pin details of Master RPAS Sensor: Sr. No. Signal Name Signal Description 1 IGN Ignition 2 LIN LIN 3 GND Ground 4 AD1CH (Slave 1 MAS Connect) Master to Slave 1 sensor 5 AD2CH (Slave 2 MAS Connect) Master to Slave 2 sensor 6 AD3CH (Slave 3 MAS Connect) Master to Slave 3 sensor 2. Slave Sensor Pin details of Slave RPAS Sensors: Sr. No. Signal Name Signal Description 1 IGN Ignition 2 NC No Connection 3 GND Ground 4 MAS Master (Goes into AD1CH, AD2CH , AD3CH) 5 Factory Setting pin. Do not connect - Float 6 Factory Setting pin. Do not connect - Float BCM TO SENSOR ELECTRICAL INTERFACE "Ultrasonic sensors mounted on the rear bumper. The slave sensors hardwired to the master sensor and the master sensor hardwired to the BCM ECU through LIN. The sensors powered through ignition and controlled by BCM ECU. The ground of the sensors shall be connected to the ground of the vehicle."