SAFARI BSVI SERVICE MANUAL

BODY 75 2.59. SUNROOF RESET PROCEDURE - SELF LEARNING THE POWER SUNROOF Please first read and note the introductory information and attention to WARNINGS! Self learning the sunroof shall be only done after completion of Initializing the sunroof Self learning command procedure: 1. Sliding sunroof and Sunshade Rollo shall be in open position within 4mm to 200mm from the cutout. 2. Close the sunroof fully by pressing sunroof close switch and keep the switch pressed continuously. Do not release the switch and wait for following actions to perform. • Sliding sunroof will start opening after 5 sec pause and close fully automatically. 3. Release the Switch to complete the procedure. 4. Close the Rollo fully by pressing Rollo close switch and keep the switch pressed continuously. Do not release the switch and wait for following actions to perform. • Rollo will start opening after 5 sec pause and close fully automatically. 5. Release the Switch to complete the procedure. NOTE Incase Close switch is released in the middle of procedure, repeat from step 1.