SAFARI BSVI SERVICE MANUAL

BODY 25 2.9 FRONT DOOR REMOVAL 1. Remove electrical connection of door wiring harness. 2. Remove Check-strap from front door assembly in full open condition - By removing one MTG screw from body side . 3. Hold the Door assembly firmly in complete open condition. 4. Accesses the door Hinge MTG screw and remove four MTG screw from Door side. NOTE Before fitting the check strap apply grease on it. Grease type (Maker, Type): KLUBER, POLYLUB 801. Regreasing interval: 6 Months or 10,000km within. 1. While fixing Hinge MTG Screw, please fix Datum Screw first. 2. Door latch and Striker Setting need to be done For Rattling Noise of side Doors. 3. Door to be maintain 0.5mm under flush 5. Slowly pull out the door and pull out the wiring harness carefully which was disconnected earlier. FITMENT For fitment follow the reverse procedure of removal.