SAFARI BSVI SERVICE MANUAL

SUSPENSION 20 8. Using tool part no. 541258904601 remove Tie rod ball joint from knuckle. NOTE: Use hook to hang tie rod ball joint 9. Remove knuckle to LCA Mtg. & Remove Lower Control Arm (LCA). 10. Disengage Driveshaft from Gearbox end. NOTE:  Collect Gearbox oil in suitable container after disengaging driveshaft from gearbox end.  Use hook to hang the driveshaft suitably after removal from gearbox side. 11. Assemble driveshaft removal tool (541258903301) on wheel hub with the help of wheel nut. 12. Remove driveshaft from knuckle end by rotating special tool rod & take out driveshaft from vehicle. PRECAUTION:  While disengaging driveshaft from gearbox take care that oil seal should not be damage.  Do not pull drive shaft excessively as the plunge joint will come out of housing and damage the boot Pry. Plunge joint housing for taking out joint out of splines.  Do not place the drive shaft on rough / uncleaned surfaces. This might damage the drive shaft boot.