SAFARI BSVI SERVICE MANUAL

CLUTCH RELEASE SYSTEM 11 9. BRAKE SWITCH INSTALLTION PROCEDURE 1. Adjuster (B) to be snapped on Brake light switch mounting bracket. 2. There should not be play in the adjuster after fitment with mounting bracket. 3. Insert the switch (A) in adjuster (B) till the switch plunger get completely Pressed against brake pedal (at this point switch body will rest on brake pedal) 4. Rotate the switch in direction ‘C until its lock. 5. After locking, the switch will set back by 1±0.15mm. Allowable angular Tolerance for the operation of pedal is ±1º and will be checked from the top face of switch Body . BRAKE SWITCH CONNECTOR DETAILS PINOUT DETAILS PIN NO. FUNCTION 1 TERMINAL 2 FITMENT 3 OPERATION 4 ADJUSTER PIECE