SAFARI BSVI SERVICE MANUAL

6F33 TRANSAXLE 26 10. AUTO TRANSAXLE FLUID CHECK AND CHANGE INTERVAL AUTO TRANSAXLE FLUID CHECK AND CHANGE INTERVAL T/M Lubricant to be used at AT maker / Vehicle maker / Dealer / Garage (Repair shop ) Check & Replenishment Change Private Use Commercial Normal use Severe use* 6F33 Hyundai Transys Genuine ATF SP-IV M1 Equivalent (SK, S-OIL or Michang ATF SP-IV M1 Equivalent) No Check** No Service Required Every 100,000 km Every 90,000 km 1. Severe usage (marked *) is defined as, a. driving in rough road ( bumpy road, gravel road, snowy road, unpaved road & etc.) b. driving on mountain road (ascent/descent) c. repetition of short distance driving d. more than 50% operation in heavy city traffic during hot weather above 30 ℃ e. police, taxi, commercial type operation or trailer towing, etc. 2. Method of Oil level check ( marked ** ) Basically, 6F33 Auto Transaxle Fluid oil level check is “No check” (Precondition: Same as 6F33 Auto Transaxle factory delivery condition) 3. If you have any problem, please visit or call authorized official dealer of TATA Motors Ltd. CAUTION Prohibit the 6F33 ATF oil level check by general driver, unauthorized dealer or maintainability factory. Because ATF oil level check process is required to disassemble or assemble the Auto T/M inner parts (Overhaul) And do not fill the MTF (Manual Transaxle Fluid ) and unsuitable ATF ( such as Dextonor other company ATF for example AISIN AW, JATCO, GM, FORD, ZF, MMC, DSI, BTR, etc.) ATF OIL LEVEL CHECK METHOD (DRAIN PLUG, GASKETS, ETC) NOTES 1. In transmission assembly bench test. Check fluid level according to right procedure before test. 2. When checking fluid level, be careful not to enter dust, foreign matters, etc. from fill hole. 3. To drain fluid completely, remove drain plugs.