SAFARI BSVI SERVICE MANUAL

6F33 TRANSAXLE 20 C. REMOVAL MANUAL CONTROL LEVER (BASED ON SHIPPING CONDITION) 1. Rotate the manual control lever smoothly to N- Range 2. Remove (1) nut, (2) spring washer (3) manual control lever smoothly. CAUTION Never reuse (1) spring washer (2) nut. Scrap the manual control lever. REFERENCE VIEW Manual control lever position for A/T shipping condition (N-Range) D. ADJUSTMENT METHOD OF INHIBITOR SWITCH (Manual Control Lever ‘N’-Range Setting Method) 1. From method of install inhibitor switch, After installation of manual control lever. 2. Set the manual control lever to the ‘N’-range. 3. Loosen the inhibitor switch fixing bolts and turn the inhibitor switch body so the hole in the end of the manual control lever and the hole (section B-B in the figure) in the flange of the inhibitor switch are aligned. 4. Put the position locking pin into the hole between manual control lever and inhibitor witch. 5. Tighten the bolts for inhibitor switch 10 ~ 12 Nm torque. (Condition of locking pin insertion on ‘N’- range.) Make sure that the position of the inhibitor switch does not move at this time.