SAFARI BSVI SERVICE MANUAL

C635 TRANSAXLE 24 8. FLUID FLUID DRAIN AND FILL The transmission does not require scheduled maintenance and should be performed only as a result of revision operations for control / replacement of internal components. Therefore in all other operations of removal and installation, gearbox oil is to be reused. CAUTION Possible foreign bodies in the container or in the storage area can compromise the reutilization of the manual gearbox oil. The transmission oil collection and its storage before re-use should be made with a clean container with a protective cover. 1. Raise and support the vehicle. 2. Remove the transmission fill plug and check that the oil level is just below the bottom edge of the fill hole. 3. If oil level is low, add the recommended oil (Vehicle Recommended Fluids/Specifications). 4. Remove transmission drain plug to allow the oil to into a suitable drain pan. NOTE: Do not spill any oil because the indiscriminate dispersal of the product contributes to pollution. 5. Clean, then install the drain plug and tighten to the proper (Torque Specifications). 6. Check that the oil level is just below the bottom edge of the fill hole. 7. Clean the filler cap and install it in the transmission. FLUID LEVEL INSPECTION  Remove the transmission fill plug and check that the oil level is just below the bottom edge of the fill hole.  If oil level is low, add the recommended oil (Vehicle Recommended Fluids/Specifications).  Clean the filler cap and install it in the transmission.