SAFARI BSVI SERVICE MANUAL

KRYOTEC ENGINE 176 9. Install the engine oil filler housing and gasket (2a) and tighten the oil filler housing to cylinder head cover bolts (2b) to the proper (Torque Specifications). 10. Remove the tool holder with the cylinder head top and separate from the holding tool. 11. Install the cylinder head cover (Refer to 09 - Engine/Cylinder Head/COVER(S), Cylinder Head/Removal and Installation). H. PISTON REMOVAL 1. Remove the snap rings (1). 2. Remove the pin (2a) and separate the connecting rods (2b) from the pistons (2c). 3. Remove piston rings (1a) from the pistons using a suitable tool (1b). 4. Inspect the connecting rod bushing if the bushing is out of spec, then replace the connecting rod (Refer to 09 - Engine/Specifications). FITMENT 1. Check the alignment of the connecting rods using suitable equipment; if it is not correct, replace the connecting rod. 2. Check that the weight difference between the pistons corresponds to the recommended figures.