SAFARI BSVI SERVICE MANUAL

KRYOTEC ENGINE 115 30. Remove the intake manifold with gasket (1). 31. If necessary, remove the screw (1) and the pressure sensor. FITMENT 1. Using a NEW gasket, install the intake manifold and pressure sensor. 2. Tighten the nuts (1) to the proper (Torque Specifications). 3. Install the bottom mounting stud (1) securing the fuel injection pump and securely tighten. 4. Install the support bracket securing the intake manifold and securely tighten. 5. Install the bolt securing the wire harness to the intake manifold. 6. Install the oil vapor pipe and securely tighten the bolt. 7. Connect the pressure sensor wire harness connector. 8. Install the wire harness assembly the intake manifold and securely tighten bolt. 9. Connect the fuel pressure sensor wire harness connector. 10. Connect the glow plug wire harness connector to each glow plug. 11. Using a NEW O-ring seal, install vapor separator assembly. 12. Install the bolt (1) securing the oil recovery pipe to the oil pan and securely tighten. 13. Connect the swirl valve actuator wire harness connector. 14. Install the lower bolt (1) securing the engine oil vapor recovery pipe to the engine block and securely tighten. 15. Install the bolt (2) securing the oil vapor separator to the intake manifold and securely tighten. 16. Install the oil vapor pipe and tighten the clamp. NOTE 170 CV