SAFARI BSVI SERVICE MANUAL

KRYOTEC ENGINE 107 5. Remove the nuts (3a) and position aside the Differential Pressure Sensor (DPS) (3b) with bracket. 6. Remove the nut (1a) and the ground wire. 7. Disengage from the holder and disconnecting the Power Transfer Unit (PTU) wire harness connector (2a). 8. Open the clamps (3a) and unhook the Powertrain Control Module (PCM) wire harness (3b) from the PCM mounting bracket (3c). 9. Remove the nuts (4a) and the bolts (4b) and the PCM with mounting bracket (3c). 10. Disconnect oil pressure sensor wire harness connector (1a). 11. Remove oil pressure sensor (1b). FITMENT 1. Install the oil pressure sensor (2) and tighten to the proper (Torque Specifications). 2. Connect oil pressure sensor wire harness connector (1). 3. Install the PCM with mounting bracket and securely tighten the nuts and bolts. 4. Install the PCM wire harness into the PCM mounting bracket wire harness retainer and close the clamp. 5. Connecting the PTU wire harness connector and attach to holder. 6. Install the ground wire and securely tighten the nut. 7. Connect the PCM wire harness connectors. 8. Install the DPS with bracket and securely tighten the nut. 9. Install the glow plug module and securely tighten the nut. 10. Install the engine cover (Refer to 09 - Engine/COVER, Engine/Removal and Installation). 11. Connect the negative battery cable.