SAFARI BSVI SERVICE MANUAL

KRYOTEC ENGINE 103 H. ENGINE OIL FILTER NOTE Following a complete replacement of the engine oil, update the "change engine oil" function in the specific engine Control Module using the diagnostic tool. NOTE Minimize skin contact with engine oil. Engine oil is harmful to the skin. In case of contact, wash with soap and water. 1. Raise and support the vehicle (Refer to 04 - Vehicle Quick Reference/Hoisting/Standard Procedure) 2. Remove the belly pan (Refer to 13 - Frame and Bumpers/Under Body Protection/BELLY PAN/Removal and Installation). 3. Remove the cap and insert a suitable drain hose onto the fitting (1) on the oil filter housing and drain the oil filter housing. 4. Remove the engine oil filter cover (1). 5. Remove the oil filter element (1) from the oil filter cover. 6. Remove the O-ring (2) from the oil filter cover. INSTALLATION 1. Install a NEW oil filter element (1a) engaging the retaining clips (1b). 2. Install a NEW O-ring (2) on the oil filter cover. 3. Install the oil filter cover and tighten to the proper (Torque Specifications). 4. Remove the drain hose used for oil recovery and install the cap on the fitting. 5. Refill the engine lubrication system with the proper quality and quantity of engine oil (Refer to 04 - Vehicle Quick Reference/Capacities and Recommended Fluids/Specifications). NOTE In the table is shown the amount for periodic replacement.