TIGOR

ELECTRICAL 21 7.2. FASTENERS TORQUE VALUE TABLE SR.NO . APPLICATION TORQUE VALUE 1 Head Lamp Mounting (M6 x16) 0.45 - 0.65 Kgf-m 2 Front Fog Lamp Mounting 0.45 - 0.65 Kgf-m 3 Tail lamp – Hatch (M6 bolt) 0.3 Kgf-m 4 High mounted stop lamp SNAP FIT 5 SRL (Side Repeater Lamp) SNAP FIT 6 RPL (Reverse Parking Lamp) SCREW FIT 7.3. GENERAL SYMPTOMS AND DIAGNOSTICS 1 HEAD LAMPS HIGH/LOW BEAM CONDITION POSSIBLE CAUSE CORRECTION/REFERENCE ITEM Single head lamp (RH or LH) not working 1. Grounding point loose Tighten grounding properly 2. Head Lamp 8 pole connector loose Fix connector properly 3. High/Low beam terminal (Pink/Blue wire) has come off the 8 pin connector Insert the terminal into the connector properly 4. HL Low Beam 15A Fuse or HL High Beam 15A Fuse in Engine F/R Box blown Replace the fuse 5. HL Low Beam Relay(20A) or HL High Beam Relay(20A) in Engine F/R Box loose Fix the relay properly 6. High/Low beam filament in the bulb blown Replace bulb Both lamps not working 1. Head lamp ON Relay(20A) in engine F/R Box loose Fix the relay properly 2. Connectors at combi-switch loose Fix the connectors properly 3. High / Low beam switch in combi-switch faulty Replace combi-switch 4. BCM connector loose. Fix the connector properly.