NANO

TRANSAXLE 128 7. Make proper routing of wiring harness clamp and connect the ‘Transmission Input Speed Sensor’ female connector carefully. NOTE Do not forget to secure the female connector using the clip provided for the purpose. 8. Connect the ‘Transmission Control Unit’ (TCU) and ‘Electronic Throttle Control (ETC) wiring harness connectors carefully. 9. Clamp the cylinder head vaccum hose using plier properly. 10. Tighten clamp of air intake pipe from filter side as well as from engine side by screw-driver properly. 11. Tighten all six wing bolts of engine access cover as per specified torque. (6 Nm).