NANO

TRANSAXLE (NANO AMT) 111 15. Tight lock nuts to both input and lay shaft assembly, by locking input shaft by adaptor. 16. Apply liquid sealant and place the rear cover and tighten the bolts to a torque of 2.1 ~2.5 Kgm. 17. Smear the interlock pin with grease and place it in its slot. (Grease is applied to hold it in the slot). 18. Apply the sealant and place the top cover on the rear half housing. 19. Tighten the M 8 bolts to a torque of 2.1 ~ 2.5 Kgm. 20. Screw the filler plug. 21. Tighten the two M8 bolts on the front housing side to a torque of 2.1 ~ 2.5 Kg-m. 22. Install the speed sensor and secure it by tightening the M6 bolt to a torque of 1.1 kgm such that there is no free movement of the sensor.