NANO

ENGINE COMPONENTS 13 6. Connect both inlet and outlet radiator hoses clamps. 7. Install the condensor assembly carefully. 8. Tighten condenser bolts mounted on the both side of the body as per the specified torque. (8 Nm) 9. Tighten the clamp bolt for radiator and condenser hoses as per the specified torque. (9 Nm) 10. Connect high and low side refrigerant hose and tighten their bolts as per the specified torque. (8 Nm) NOTE Replace ‘O-rings’ of high and low side refrigerant hoses if necessary to avoid leakage. 11. Tighten the drain plug.