NANO

ENGINE COMPONENTS 7 3.0 RADIATOR REMOVAL AND RE- FITMENT ON VEHICLE:- Cooling System Precautions: WARNING 1. Coolant is poisonous to humans and animals. Do not ingest. It may cause injury and even death. 2. Do not remove the coolant reservoir cap while the engine cooling system is still hot. It may spray out hot coolant and steam causing severe burns. CAUTION Do not remove the coolant reservoir cap while the engine cooling system is still hot. It may spray out hot coolant and steam causing severe burns. NOTE Always dispose engine coolant properly to avoid harming the environment. 1. Allow Engine and Radiator to cool down till ambient temperature. 2. Always disconnect the battery negative (-) cable to prevent operating of radiator fan accidently. 3. Always drain the entire cooling system and fill with fresh premixed coolant. Do not reuse previously drained coolant. Presence of dirt in coolant chokes up passages in radiator, cylinder head and crankcase, thereby causing overheating of engine. 4. Always add the recommended brand and mixture of coolant to the engine cooling system. Using a mixture or brand other than recommended may damage the cooling system components. 5. Using recommended premixed coolant prevents rust formation and freezing of coolant inside the passages of radiator, crankcase and cylinder head. Removal: 1. Open the front bonnet. 2. Turn the wheel to lock to lock position. 3. Remove all mounting screws of fender liner. 4. Remove fender liner.