NANO

882 HVAC BLOWER RESISTOR Removal 1. Disconnect the electrical connector of blower re- sistor. 2. Remove the blower resistor mounting screw. Installation : 1. Tighten the screw and install blower resistor. 2. Connect the electrical connector. 2. Turn blower unit (anticlockwise) to unlock from the housing and take out the blower unit. Installation 1. Install blower unit into the housing and turn (clock- wise) to lock. 2. Tighten the blower unit screw. BLOWER UNIT Removal 1. Disconnect the electrical connector of blower unit and remove the screw securing blower unit to the HVAC unit. 3. Take out the blower resistor.