NANO

866 HVAC CONTROL PANEL ASSEMBLY Removal : 1. Remove instrument cluster (Refer Instrument cluster removal/Body Electrical) 2. Remove four screws of control panel assembly. 3. Disengage following three Bowden cables from control panel assembly (a) Temperature mix cable (b) Air distribution cable (c) Fresh recirculation cable 4. Disconnect the electrical connectors and take out control panel assembly. Installation 1. Connect the electrical connectors of control panel assembly 2. Engage the Bowden cables (Temperature mix cable, Air distribution cable and Fresh recirculation cable) with the control panel assembly. 3. Tighten four screws of control panel assembly. 4. Install instrument cluster. (Refer instrument cluster installation procedure/Body Electrical) a b c