NANO

BODY 787 BODY NOTE : Refer removal procedure of front latch assembly as disengaging the links from rear latch assembly is similar to that of front latch assembly. For vehicles with central locking unit : 6. Disconnect the electrical connector of central locking follower unit and take out latch assembly along with central follower unit. 7. Disassemble central locking follower unit and latch assembly by removing mounting screws. Inspection 1. Inspect central locking follower unit (Refer Body Electrical Group) 2. Inspect latch assembly for any damage or any bent linkages. Installation 1. For vehicle with central locking unit. (a) Assemble central locking follower unit with latch assembly by tightening mounting screws. (b) Connect the electrical connector of central locking follower unit. 2. Tighten three screws of latch assembly. 3. Engage following links : (a) Door inner handle link – from door inner handle to latch assembly. (b) Outer handle link – from outer handle to latch assembly. 4. Fit door window glass. (Refer Rear door window glass installation procedure) 5. Fit door pad. (Refer front door pad installation procedure) NOTE : Removal and Installation procedure of OUTERDOOR LOCK REAR, DOOR INNER HANDLE REAR and REAR DOOR STRIKER is similar to that of front side.