NANO

776 BODY 4. Remove the locking clip of lock barrel. Inspection 1. Inspect central locking master cum follower unit. (Refer Body Electrical Group) 2. Inspect latch assembly for any damage or any bend linkages. Installation 1. For vehicle with central locking unit. (a) Assemble central locking master cum follower unit with latch assembly by tightening mounting screws. (b) Connect the electrical connector of central locking master cum follower unit. 2. Tighten three screws of latch assembly to specified torque. TIGHTENING TORQUE FOR LATCH SCREWS = 1 Kg-m 3. Engage following links : (a) Door inner handle link – from door inner handle to latch assembly. (b) Outer handle link – from outer handle to latch assembly. (c) Door lock barrel link – from door lock barrel to latch assembly. (For vehicle with central locking unit) 4. Tighten the bolt of guide channel. 5. Fit door pad. (Refer front door pad installation procedure) NOTE : On front passenger door, latch assembly is assembled with central locking follower unit whose removal and installation procedure is similar to that of driver’s side. FRONT DOOR LOCK BARREL Removal 1. Lift the glass to upper most position. 2. Remove door pad. (Refer front door pad removal procedure) 3. Disengage the link from the lock barrel.