NANO

764 BODY 2. Remove front bumper (Refer front bumper removal procedure) 3. Remove two bolts securing fender to the body. 4. Remove the bolt (located below door shown by arrow) securing fender to the body. 5. Remove two bolts (located near door hinges shown by arrow) securing fender to the body and take out fender. Installation 1. Position the fender on body and tighten all mounting bolts to specified torque. TIGHTENING TORQUE FOR FENDER BOLTS = 1 Kg-m 2. Fit front bumper. (Refer front bumper installation procedure) 3. Connect the electrical connector of side repeater lamp and fit the same. (Press fit type) FENDER (SIDE BONNET) Removal NOTE : The removal procedure of fender is identical for other side. 1. Pry out the side repeater lamp and disconnect the electrical connector.