NANO

700 ELECTRICAL 3. Disconnect electrical connection 4. Take out the door switch. REVERSE LAMP SWITCH FUNCTION An open switch that prevents voltage from being applied to the backup lights until the vehicle is put in reverse. Putting the vehicle in reverse closes the contact and applies power to the tail lamp lights. LOCATION It is located on transaxle rear housing REMOVAL 1. Remove the tail gate. For “Removal & refitment of tail gate” refer Body group. 2. Remove the Rear shelf. For “Removal & refitment of rear shelf” refer Body group. 3. Disconnect the electrical connection. 4. Loosen the locking nut & take out the switch. REFITMENT 1. Tighten the locking nut. 2. Connect the electrical connection 3. Fit the rear shelf& tail gate. DOOR SWITCH FUNCTION: Door switch which is switched on or off in response to opening and closing of doors, an interior dome lamp which is turned on or off in response to the door switch or select ively turned on or of f by manual operation. LOCATION It is located on ‘B’ pillar. REMOVAL 1. Remove the rubber grommet. 2. Remove the screw