NANO

ELECTRICAL 693 ELECTRICAL REFITMENT : 1. Connect all electrical connectors of combi switch assembly. 2. Fit combi switch assembly on steering column are and tighten the screw. NOTE : Two lock ribs are provided on the steering column, which will fit into the combi switch slots, to avoid the rotation of switch & ensure proper fitment 3. Fit both steering column panels/nacells. 4. Fit steering wheel. NOTE: Ensure that side levers are fitted in their respective place and correct connectors are connected. CAUTION: When tightening upper tray cover, ensure that combination switch wires are not caught between the covers. STALKREPLACEMENT PROCEDURE 1. Remove the combi-switch. Refer removal & refitment of combi –switch. 2. Remove the 2 screws & pull out the stalk. 3. Replace with new one. 4. Follow the step in reverse for refitment of stalk. HORN PINREPLACEMENT: 1. Remove two screws of Horn locking pin from Central Housing. 2. Remove spring alongwithworn out pin and replace NewHorn pin with the same spring, Retainer plate & screws. 3. Apply Electrical grease in the grease pocket of Horn pin. 4. Assemble the socket terminal with horn pin.