NANO

682 ELECTRICAL 8.15 POWER WINDOW SYSTEM (only for driver & co-driver window) FUNCTION: An open switch that’s used to prevent voltage from being applied to the power window electric motor until the switch button is depressed. This action trips the switch, closes the contacts and power is applied to raise or lower the windows glass. The switch will function when ignition key is turned to ‘ON’ position. For taking window glass ‘UP’, press and hold the switch towards position marked, and for down, press towards position marked. NOTE: 1. Do not press switch further when window glass is at its extreme position. 2. Do not operate window glass frequently, otherwise Window winding motor may get over heated and stop working till it cools down. LOCATION: The windowwinding switches are provided on the floor centre console. Driver & Passenger co-driver can individual Operate the switches. REMOVAL: 1. Remove the floor console. (Refer body group) 2. Disconnect the electrical connector. 3. Remove the power window switch from back of console by pressing the lock clip of switch. NOTE : Do not remove the switch from front of con- sole it will damage the lock clip I NSPECTION : For non-functioning of theWindowwindingmechanism check following: 1. Check fuses. If blown then replace them. 2. Check all related electrical connections at connectors. 3. If found OK, then check operating switch for proper functioning. Replace them if required.