NANO

670 ELECTRICAL REMOVAL& REFITMENT OFWASHER TANK REMOVAL 1. Remove front bumper (Refer “REMOVAL & REFITMENT OF FRONT BUMPER” from Body section) 2. Disconnect the windscreen washer tube from washer bottle. 3. Disconnect electrical connector of front windscreen washer pump 4. Remove two mounting bolts securing washer tank to the body and take out washer tank. INSPECTION 1. Connect the battery positive and negative terminals to washer motor positive and negative terminals and check if it is working properly. NOTE: These tests must be performed quickly (within 20 seconds) to prevent the coil from burning out. 2. Check the bottle for cracks and leakages if any. REFITMENT 1. Align windscreen washer tank to the body and tighten two mounting bolts. 2. Connect electrical connector. 3. Connect washer tube to washer bottle. 4. Fit front bumper. For connection details refer circuit schematics section.