NANO

ELECTRICAL 643 ELECTRICAL 9) Then fix through bolt (2 Nos.) and tighten NOTE: While servicing the brush gear assy. please ensure that new brush springs to be replace. (Especially in burnt Starter Motor) 7) Assembly the Brush gear assembly into the commutator ends. By using Bullet as shown in fig. 8) Assembly the CE bracket assembly and insert the BG fixing screw (2 Nos.). 10) Assemble solenoid & two fixing screws. Ensure that solenoid is assembled in the engaging lever assembly. 11)Assemble the lead assembly & nut into the solenoid switch. 12) Tightening of the Starter Terminal nut.