NANO

612 ELECTRICAL 4. ROUTINE MAINTENANCE • Ensure correct battery electrolyte level. • Check the general condition of the battery. • Apply petroleum jelly to battery terminals. • Ensure that the ventilation slots are clear. • Keep theAlternator clean. • Ensure that the electrical connection is tight & secure. • Check and ensure that mounting bolts are tightened properly. • Ensure that the belt on the Alternator is in good condition. • Check the belt tension and ensure that it is neither too slack nor too tight. • Adjust the belt deflection to 5-6 mm when pressed at midway of the longest point between pulleys. 5. SPECIFICATION A. FOR NANO- NON A/C 1 TYPE SIA114 2 RATING CONTINUOUS 3 BATTERY 12V 4 NOMINAL OUT PUT 12V 40AAT 25 0 C 5 OPERATINGTEMP. -30 0 C TO 100 0 C 6 WEIGHT 3.3 KG 7 RATEDMAXIMUM 6000 R.P.M. 8 MAX.OPERATING SPEED 18,000 9 NO.OF POLES 12 10 OVER SPEED WITH 20000 R.P.M MAX. OUTPUT FOR 0.5 MINS. 11 POLARITY -VE EARTH 12 REGULATOR SYSTEM BUILT-IN REGULATOR 13 REGULATORDESIGN HYBRID REGULATOR 14 REGULATOR SET 14.5 ± 0.2V VOLTAGE 15 DIRECTIONOFROTATION CLOCKWISE (VIEWED FROM PULLEY SIDE) 16 TEMPERATURE -7 ± 3 M V/ 0 C COEFFICIENT B. FOR NANO A/C 1 TYPE SIA120 2 RATING CONTINUOUS 3 BATTERY 12V 4 NOMINAL OUT PUT 12V 70AAT 25 0 C 5 OPERATINGTEMP. -30 0 C TO 100 0 C 6 WEIGHT 4 KG 7 RATEDMAXIMUM 6000 R.P.M. 8 MAX. OPERATING SPEED 18,000 9 NO.OF POLES 12 10 OVER SPEED WITH 20000 R.P.M MAX. OUTPUT FOR 0.5 MINS. 11 POLARITY -VE EARTH 12 REGULATOR SYSTEM BUILT-IN REGULATOR 13 REGULATORDESIGN HYBRID REGULATOR 14 REGULATOR SET 14.5 ± 0.2V VOLTAGE 15 DIRECTIONOFROTATION CLOCKWISE (VIEWED FROM PULLEY SIDE) 16 TEMPERATURE -7 ± 3 M V/ 0 C COEFFICIENT