NANO

STEERING SYSTEM 575 STEERING CAUTION : Care should be taken such that self cancellation lugs do not get damaged (self cancellation lugs are shown in below figure with arrows) Inspection : 1. Check for any damage to self cancellation lugs, if found, replace complete steering wheel. Installation : 1. Align the marks made on the steering wheel and the shaft. Install steering wheel on steering shaft. 2. Tighten the steering wheel nut to the specified torque. TIGHTENINGTORQUE FORSTEERINGWHEEL NUT = 8.6 ± 0.2 Kg-m 3. Fit horn pad (Press fit type) 4. Connect battery. STEERING COLUMN ASSEMBLY Removal : 1. Disconnect battery. 2. Remove steering wheel (Refer steering wheel removal procedure) 3. Remove combi switch assembly. (Refer combi switch assembly removal / Body Electrical group) 4. Remove ignition switch assembly. (Refer ignition switch assembly removal procedure/ Body Electrical group) 5. Remove two screws of nacelle bottomcover. 6. Remove four nuts of steering column assembly.