NANO

572 STEERING SYSTEM 5. Correct fitment of RUBBER SEAL on steering rack and pinion assembly is to be ensured (Matching of groove of rubber seal with steering rack is to be ensured). Also ensure that MAKE of rubber seal and rack and pinion assembly are same. NOTE : Following figure ONLY shows the position of rubber seal mounted on steering rack. The design of rubber seal may vary with different MAKE. 7.3 ON VEHICLE REPAIRS Following are few precautions which need to follow while handling or working on steering system components. 1. Whenever a new steering upper column or steering column assembly is to be fitted, always check for FREE ROTATING TORQUE of steering upper column (3.5 kg-cm max.) 2. While replacing steering wheel, care should be taken such that SELF CANCELLATION LUGS do not get damaged. 3. While fitting steering column on steering rack and pinion assembly, NO tempering (e.g. Inserting screwdriver through holes for any adjustment) should be done with universal joint. The location of tempering is as shown by arrow in following figure. 4. While installing or checking steering column assembly or steering upper column, DO NOT temper with steering upper column mounting bracket holes (as shown by arrows in following figure) Steering upper column