NANO

546 BRAKE SYSTEM INSPECTION OF DISMANTLED PARTS : 1. Inspect wheel cylinder bore, it should be free from any wear, ridge, scratch or any other marks, if the cylinder bore is having any mark, then replace Wheel cylinder assembly. 2. In the same way inspect wheel cylinder piston, it should be free from any wear, scratch or any other marks, if, it is free from any marks, then only, this wheel cylinder can be rebuilt with Minor Kit (1), otherwise this wheel cylinder can be rebuilt with Major kit (5). ASSEMBLY OF WHEEL CYLINDER : 1. If, the wheel cylinder is rebuilt with Minor kit (1), lubricate the new seals, pistons with fresh brake fluid and also lubricate the special tool shown in figure. 2. Mount piston on the special tool, slide the seal over the tool, by orienting the seal in right direction, i.e. smaller dia of seal out side and bigger dia of seal on inner side of piston.