NANO

538 BRAKE SYSTEM CAUTION: 1. Discard all used rubber parts. Never use any mineral oil base fluids like Kerosene, Diesel, Petrol, Thinner etc. for cleaning of the Brake Aggregates and their child parts. 2. Ensure visually that the inlet ports (compensatory ports and inlet ports) are clear. Do not poke these holes with sharp objects. Clean them only with dry compressed air. 9. Remove the Secondary PistonAssembly (10) by tapping the TMC at flange, gently on a wooden block. 10. Clean the Master Cylinder body and internal parts with fresh brake fluid and ensure these parts are kept in a clean tray or on a clean sheet of paper. 3. If contamination is observed on the removed seals (Normally they would have swollen and can be compared with new seals from the kit, which will show clearly that the size is enlarged). The entire rubber parts in the system including both front and rear hoses must be discarded and the entire system should be flushed with fresh brake fluid.