NANO

446 SUSPENSION SYSTEM 2. Assemble the coil spring such that compressor tool is on spring seat. 3. Assemble the rubber seat inside the spring seat and assemble it on coil spring. 4. Assemble thrust bearing on spring seat. Wrong direction of insertion. 5. Remove support cup assembly (11) & stopper (12) CAUTION: Check stud threads of support cup assembly. If found damaged, replace the support cup assembly. 6. Remove strut mount (10) CAUTION: Check strut mount for any deformation or cut. If found damaged, replace the mount. 7. Remove mount seat (09) and dust seal (08) NOTE: Check the dust seal for cracks. If found any cracks, replace the seal. 8. Remove bearing seat (07) followed by bearing (06) and spring seat (05). 9. Remove spring with spring compressor. CAUTION : While removing the coil spring care should be taken such that piston rod, outer tube and bump stopper do not get damaged. 10.Remove bump stopper (03) CAUTION: Check for any crack or deformation. If found any, replace bump stopper. 4. Take out inner support (13) NOTE: Check for any deformation or damage to inner support. Bumper Stopper Correct direction of insertion. Inspection of removed components 1. Check/inspect individual component of strut assembly and replace the damaged or worn parts. Assembly 1. Assemble bump stopper on piston rod. CAUTION: Direction of bump stopper should be such that flat portion is on bottom side and groove portion is on top.