NANO

386 DRIVETRAIN 5. Insert the two bevel pinions on either sides of the cage. 6. Insert the spider through the cage and then through the bevel pinions. Make sure that the slot in the spider is aligned with the slot in the cage. B. ASSEMBLY 1. Hold the differential cage in a vice and place the final gear drive on it aligning the bolt holes. 2. Apply thread lock gum to the bolts and tighten them to a torque of 6.9 Kgm. 3. Place the washer on the bevel gear. 4. Place the two bevel gears with washers in the differential cage.