NANO

308 ENGINE 273 MPFI EMERGENCY SERVICE TIPS (ENGINE) These tips are given for your guidance. These preliminary jobs are to be carried out in an emergency. In normal cases the problems should be attended to in an Authorised Service Outlet by following the repair procedures given in the Workshop Manual. Sr. No. Problems Observed Probable Cause Action To Be Taken 1. Engine not cranking • Get bat tery checked and/or changed • Jump start using another battery • Clean and tighten connections • Get the air removed by cleaning • Check leakages and correct • Replace the fuse • Get the vehicle checked and rectified at Authorised Workshop • Check and correct leakages, top up coolant • Get the hose replaced • Add Oil • Fit the auxiliary water tank cap correctly • Get defect rectified • Get defect rectified • Get defect rectified • Get defect rectified • Clean it • Get defect rectified • Get defect rectified • Get the belt tension adjusted, replace if broken • Get it adjusted correctly • Remove the air • Clean / Replace the element • Clean / Replace the element • Get it rectified • Get it rectified • Get cable replaced • Replace Dead battery, loose or improper bat- tery/electrical connections Air in the fuel system Engine stop solenoid fuse blown Some fault are detected by the ECU controlled system Coolant level low, coolant leakages Hose collapsed/torn Low engine oil level Cap not sealing properly AC condenser fan not working Brakes binding Electric fan not working High delivery pressure inAC refrig- erant circuit Radiator fins clogged Radiator water passage clogged Thermostat defective Battery not getting charged due to loose belt Accelerator cable loose Air in the fuel system Clogged fuel filter Clogged air filter Clutch slipping/out of adjustment Brakes grabbing Accelerator cable broken Fuel filter choked 2. Engine cranks but does not start 3. Check engine lamp conti- nue to glow even after start 4. Engine overheats 5. Charging indicator continuously remains ON 6. Poor pickup 7. Does not accelerate