NANO

270 ENGINE 273 MPFI • Loosen the mounting screws of the ignition coil using screw driver. Inspection of Ignition Coil • Check external condition of the ignition coil. • Check for primary and secondary coil resistance using multimeter. (Refer 3.11.5 Trouble shooting and diagnosis.) • Check for secondary coil resistance. • Check if the primary and secondary coil is short- circuited with the body. Refitment Procedure • Tighten the mounting screws of the ignition coil using screw driver. • Refit the HT cable. • Reconnect the primary coil connection. CAUTION Ensure that connector press button should be on top side otherwise engine may not start. • Connect the battery negative terminal. PRECAUTION Please ensure proper tightening of positive and negative terminals.