NANO

182 ENGINE 273 MPFI OIL FILTER REPLACEMENT • Position the car on a two post lift. • Drain the Engine Oil. (For procedure refer Engine Oil Drain Procedure). • Access the oil filter through the gap between wheel arch and wheel. • Unscrew the oil filter with the help of special tool Spanner (Part No. 2834 5890 06 15) and take it out. • Clean the oil filter mounting area properly to remove any foreign particles, dust. • Position the new oil filter with ‘O’ ring and hand tighten initially. Use special tool Spanner (Part No. 2834 5890 06 15) to tighten further. CAUTION Ensure that there should not be any oil leakage through the oil filter when engine is started after replacement of oil filter. Don’t over tighten the oil filter which may lead to damage to filter and or central mounting bolt causes oil leakage. Don’t reuse the oil filter / ‘O’ ring.