NANO

GENERAL 6 TAIL GATE STRIKER NOTE: Before removing mounting screws of the tailgate striker, do the markings on striker so that while refit- ting, the alignment of the tailgate will not change. 1. Remove two screws with the help of Allen key and take the tailgate striker out. Re-fitment of Striker: 1. Align tailgate striker with the marking and tighten two screws with Allen key. 2. Do Not Fit Striker in Reverse Direction GAS BALANCER ROD 1. Remove two c-clips provided on each side of balance rod with the help of screw driver. Pull out gas balancer rod from tailgate NOTE: Ensure tailgate is properly supported before bal- ance rods are removed. Before mounting balancer rod on tailgate, apply some grease at the end of balancer rod. Insert bal- ancer rod ends into ball points provided on tailgate. Insert c-clip inside balance rod at each end to lock the balancer rods in its place.