NANO

STEERING 19 10.Apply 2 to 3 drops of Loctite to the Yoke cover threads and tighten it to a torque of 70 kg cm. Now unscrew the yoke cover by 30 °and 45 ° ap- proxi- mately to achieve free pinion torque of 8 to 12 kgf – cm. 11.Assemble the Bellow (18) on theHousing side and secure the bellow with Bellow strap (20) and Bel- low clip (19) as shown in the fig. Scoop Sili- con grease using Forefinger and apply on groove of IBJ prior to the Bellow assembly, to enable bel- low to rotate relative to IBJ. 12.Fit the Outer Ball joints (14 & 15) on either side of inner Ball joints. 13.Check the free play of the gear at steering wheel side. (No tyre movement when steering wheel is turned). 1.3.3.4 OBJ ON-VEHICLE REMOVAL NOTE RAP need not be removed; to remove OBJ on vehi- cle disconnect the OBJ at Steering Knuckle. Refer on bench OBJ removal process.