NANO

STEERING 11 6. Loosen & remove the universal joint bolt (column side) between steering column & intermediate shaft. NOTE: Do not reuse the bolts. 7. Disconnect the electrical connector’s from the ECU. 8. Remove the steering column mounting bolts (4 no.). 9. Disengage the column assembly from intermedi- ate shaft and take out the column. REFITMENT: For assembly follow reverse procedure of removal. 1.2.3.3 INTERMEADIATE SHAFT REMOVAL 1. Loosen the universal joint bolt between steering column & intermediate shaft. NOTE: Do not reuse the bolts. 2. Remove the universal joint bolt between inter- mediate shaft and rack & pinion assembly. NOTE: Do not reuse the bolts. 3. Disengage the intermediate shaft from rack & pinion assembly and take out the intermediate shaft. REFITMENT: For assembly follow reverse procedure of removal.