NANO

FUEL SYSTEM 22 FITMENT OF CNG RECEPTACLE VALVE (On vehicle):  For fitment procedure follow the Reverse procedure of ‘Removal’  Ensure fitment of receptacle cap on receptacle. Installation of “O” Ring:  Open the Filler Valve CAP manually.  Extract / remove the “O” Ring from the neck of the filler valve.  Using Nose pliers extract the circlip.  Replace Wire Mesh filter with the New wire Mesh filter.  Place the circlip using nose pliers.  Apply siliconic oil (Loxeal 1000) on new O ‐ ring before replacing. NOTE:  Do not apply tar, paint, grease or any other material inside the receptacle as this could impair performance of the Receptacle valve.  During service always insure the manual shut– off valve of cylinder valve is closed & the vehicle is parked in well ventilated area.