NANO

ENGINE 7 5. REMOVAL AND REFITMENT OF ENGINE ACCESS WINDOW AND ENGINE COVER A. ENGINE ACCESS WINDOW Removal: NOTE:  Park the vehicle with brakes ON and duel selector switch is kept in CNG mode.  Manually turn of the tank valve and connect the TML tester tool and start the service “Empty CNG lines”  Crank the engine and run in idle condition until engine stop at its own.  Re crank the engine it should not start (tank pressure should be 0 bar) WARNING :  Do not turn OFF Cylinder Valves , in vehicle running in CNG mode. This may wrongly detect the leakage error.  Pull the strip which is located left side behind the upper part of rear seat.  Fold the upper part of rear seat  Remove the mounting bolt of upper rear seat to body.  Remove the two mounting bolts located bottom of lower rear seat.