NEXON

BODY 41 2. Mount two screw of seat belt striker from both side and do lose fitment. 3. Fit C Pillar lower trim. (For procedure refer C pillar removal process.) 4. Lift the backrest and apply force from center, such that both the latches are mounted firmely to striker provided in the body. 5. After latching tight the striker screws. 6. Fit four Rear Seat mounting screw as shown in figure. NOTE Lift the belts and buckle while cushion folding to design position 1.4.25. FRONT SEAT BELT  FOR RETRACTOR PRETENSIONER LOAD LIMITER (RPLL) REMOVAL 1. Fold the front seat to have easy access for the belt removal. 2. Loosen and remove the lower mounting bolt of seat belt. 3. Pull out show in fig 4. Remove front seat belt anchor mounting bolt.