NEXON

BODY 8 5. Disconnect the cable from hood release lever. 6. Pull out and remove the cable from the engine compartment. CAUTION Do not pull the hood latch cable from inside of cab it can damage the rubber grommet. FITMENT NOTE Check the condition of the rubber grommet, if found damaged replace the same at the time of fitment. For fitment follow the reverse procedure of removal. 1.4.2. FLOOR CONSOLE REMOVAL 1. Pull out gear shifter bezel. 2. Pull out console RH and LH side panel 3. Remove one rear floor console mounting screw. 4. Disconnect one electrical connections behind the floor console assembly.