NEXON

BRAKES 37  Assembly guide rod ‘B’ (with bush) (always opposite to bleed screw side both LH & RH). Brass colour. 3. Assemble boot guide rods, guide rod A and guide rod B. 4. Assemble the new carrier assembly to the knuckle. Apply recommended torque. Ensure correct fitment. 5. Carefully assemble the inner and outer pad assemblies respectively and ensure the free back and forth movements of pads. 6. Re-install the calliper in the carrier. NOTE: Re-install the calliper in the carrier, screw the banjo bolt (with copper gasket) to the recommended torque, then release the hose clamp, do bleeding operation and check for correct function of the calliper parts, ensure no drag and frictional noise. 7. Assemble the wheel again.