NEXON

STEERING 11 1.2.3.3. INTERMEADIATE SHAFT REMOVAL 1. Loosen the universal joint bolt between steering column & intermediate shaft. 2. Remove the universal joint bolt between intermediate shaft and rack & pinion assembly. 3. Disengage the intermediate shaft from rack & pinion assembly and take out the intermediate shaft. REFITMENT: For assembly follow reverse procedure of removal. NOTE: Do not reuse the universal joint bolts. 1.2.3.4. RACK & PINION ASSEMBLY REMOVAL 1. Remove lower universal joint bolt and make steering rack free from the steering column assembly. 2. Remove both front wheels (Refer wheel removal procedure / Wheels and tyres group). 3. Remove tie rod ball joint nyloc nut. 4. Remove tie rod end by using tie rod ball joint puller. (Part No. 2871 5890 4601).