NEXON

CLUTCH 16 1.7. TROUBLESHOOTING FOR SAC ASSEMBLY Failure Possible causes Check Release load too low (Pedal load below 3.5 kg) SAC has adjusted irregularly check condition of SAC Release load characteristic not ok based on subjective feeling of Pedal load SAC has adjusted irregularly incorrect clutch disc used SAC was not correctly mounted on flywheel see above check clutch disc set number and compare it with SAC check mounting process Clutch slippage SAC has adjusted irregularly grease contamination on friction surfaces Clutch full worn out see above check if grease on friction surfaces is noticed check gap between bolt & cover Disengagement not possible SAC has adjusted irregularly see above check if SAC was mishandeled. Whether it fell down on the ground ?